plat_sensor_table.c File Reference

#include <stdlib.h>
#include <stdio.h>
#include <logging/log.h>
#include "plat_sensor_table.h"
#include "sensor.h"
#include "ast_adc.h"
#include "pmbus.h"
#include "mpro.h"
#include "plat_hook.h"
#include "plat_i2c.h"
#include "plat_class.h"
#include "plat_mctp.h"
#include "plat_power_status.h"

Include dependency graph for plat_sensor_table.c:

Functions
	LOG_MODULE_REGISTER (plat_sensor_table)
void	pal_extend_sensor_config ()
uint8_t	pal_get_extend_sensor_config ()
bool	pal_is_time_to_poll (uint8_t sensor_num, int poll_time)
void	load_sensor_config (void)

Variables
struct plat_mpro_sensor_mapping	mpro_sensor_map []
const int	MPRO_MAP_TAB_SIZE = ARRAY_SIZE(mpro_sensor_map)
sensor_poll_time_cfg	diff_poll_time_sensor_table []
sensor_cfg	plat_sensor_config []
sensor_cfg	adm1278_sensor_config_table []
sensor_cfg	ltc4282_sensor_config_table []
sensor_cfg	mp5990_sensor_config_table []
sensor_cfg	mp5990_temp_sensor_config_table []
const int	SENSOR_CONFIG_SIZE = ARRAY_SIZE(plat_sensor_config)

Function Documentation

load_sensor_config()

void load_sensor_config

(

void

)

Here is the call graph for this function:

LOG_MODULE_REGISTER()

LOG_MODULE_REGISTER

(

plat_sensor_table

)

pal_extend_sensor_config()

void pal_extend_sensor_config

(

void

)

EVT2 switch board has two configurations that will cause the need to load different sensor table.

1st : ISL69259(VR) + MPS5990(HSC) + ISL28022(Power monitor IC) 2nd : XDPE12284(VR) + LTC4282(HSC) + INA230(Power monitor IC)

Since the BOARD_ID pins were originally used to identify which configuration has no function in this stage, so the current configuration is identified by IC_DEVICE_ID which gets from the VR chip.

The way to identify different configurations by BOARD_ID will be added back in the next stage.

pal_get_extend_sensor_config()

uint8_t pal_get_extend_sensor_config

(

void

)

pal_is_time_to_poll()

bool pal_is_time_to_poll	(	uint8_t	sensor_num,
		int	poll_time
	)

Variable Documentation

adm1278_sensor_config_table

sensor_cfg adm1278_sensor_config_table[]

Initial value:

= {
    { SENSOR_NUM_VOL_HSCIN, sensor_dev_adm1278, I2C_BUS2, ADM1278_ADDR, PMBUS_READ_VIN,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, NULL, NULL, &adm1278_init_args[0] },
    { SENSOR_NUM_CUR_HSCOUT, sensor_dev_adm1278, I2C_BUS2, ADM1278_ADDR, PMBUS_READ_IOUT,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, post_adm1278_cur_read, NULL, &adm1278_init_args[0] },
    { SENSOR_NUM_PWR_HSCIN, sensor_dev_adm1278, I2C_BUS2, ADM1278_ADDR, PMBUS_READ_PIN,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, post_adm1278_pwr_read, NULL, &adm1278_init_args[0] },
}

diff_poll_time_sensor_table

sensor_poll_time_cfg diff_poll_time_sensor_table[]

Initial value:

= {
    
    { SENSOR_NUM_VOL_ADC4_P3V_BAT, 0 },
}

ltc4282_sensor_config_table

sensor_cfg ltc4282_sensor_config_table[]

Initial value:

= {
    { SENSOR_NUM_VOL_HSCIN, sensor_dev_ltc4282, I2C_BUS2, LTC4282_ADDR, LTC4282_VSOURCE_OFFSET,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, NULL, NULL, &ltc4282_init_args[0] },
    { SENSOR_NUM_CUR_HSCOUT, sensor_dev_ltc4282, I2C_BUS2, LTC4282_ADDR, LTC4282_VSENSE_OFFSET,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, post_ltc4282_cur_read, NULL, &ltc4282_init_args[0] },
    { SENSOR_NUM_PWR_HSCIN, sensor_dev_ltc4282, I2C_BUS2, LTC4282_ADDR, LTC4282_POWER_OFFSET,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, post_ltc4282_pwr_read, NULL, &ltc4282_init_args[0] },
}

mp5990_sensor_config_table

sensor_cfg mp5990_sensor_config_table[]

Initial value:

= {
    { SENSOR_NUM_VOL_HSCIN, sensor_dev_mp5990, I2C_BUS2, MP5990_ADDR, PMBUS_READ_VIN,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, NULL, NULL, &mp5990_init_args[0] },
    { SENSOR_NUM_CUR_HSCOUT, sensor_dev_mp5990, I2C_BUS2, MP5990_ADDR, PMBUS_READ_IOUT,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, post_mp5990_cur_read, NULL, &mp5990_init_args[0] },
    { SENSOR_NUM_PWR_HSCIN, sensor_dev_mp5990, I2C_BUS2, MP5990_ADDR, PMBUS_READ_PIN,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, post_mp5990_pwr_read, NULL, &mp5990_init_args[0] },
}

mp5990_temp_sensor_config_table

sensor_cfg mp5990_temp_sensor_config_table[]

Initial value:

= {
    { SENSOR_NUM_TEMP_HSC, sensor_dev_mp5990, I2C_BUS2, MP5990_ADDR, PMBUS_READ_TEMPERATURE_1,
      stby_access, 0, 0, SAMPLE_COUNT_DEFAULT, POLL_TIME_DEFAULT, ENABLE_SENSOR_POLLING, 0,
      SENSOR_INIT_STATUS, NULL, NULL, NULL, NULL, &mp5990_init_args[0] },
}

MPRO_MAP_TAB_SIZE

const int MPRO_MAP_TAB_SIZE = ARRAY_SIZE(mpro_sensor_map)

mpro_sensor_map

struct plat_mpro_sensor_mapping mpro_sensor_map[]

plat_sensor_config

sensor_cfg plat_sensor_config[]

SENSOR_CONFIG_SIZE

const int SENSOR_CONFIG_SIZE = ARRAY_SIZE(plat_sensor_config)