plat_i3c.c File Reference

#include <stdio.h>
#include <logging/log.h>
#include "plat_i3c.h"
#include "plat_class.h"
#include "rg3mxxb12.h"
#include "p3h284x.h"
#include <errno.h>

Include dependency graph for plat_i3c.c:

Functions
	LOG_MODULE_REGISTER (plat_i3c)
void	init_i3c_hub ()

Variables
const uint8_t	rg3mxxb12_cmd_initial [][2]
const uint8_t	p3h284x_cmd_initial [][2]

Function Documentation

init_i3c_hub()

void init_i3c_hub

(

)

LOG_MODULE_REGISTER()

LOG_MODULE_REGISTER

(

plat_i3c

)

Variable Documentation

p3h284x_cmd_initial

const uint8_t p3h284x_cmd_initial[][2]

Initial value:

= {
    
    { P3H284X_VOLT_LDO_SETTING, P3H2840_I3C_LDO_VOLT },
    
    { P3H284X_TARGET_PORTS_PULLUP_SETTING, 0xA0 },
    
    { P3H284X_TARGET_PORT_ENABLE, 0xC5 },
    
    { P3H284X_TARGET_PORTSHUB_NETWORK_CONNECTION, 0xC5 },
    
    { P3H284X_TARGET_PORTS_PULLUP_ENABLE, 0xFF },
}

rg3mxxb12_cmd_initial

const uint8_t rg3mxxb12_cmd_initial[][2]

Initial value:

= {
    { RG3MXXB12_VOLT_LDO_SETTING, LDO_VOLT },
    { RG3MXXB12_SSPORTS_AGENT_ENABLE, 0x0 },
    { RG3MXXB12_SSPORTS_GPIO_ENABLE, 0x0 },
    { RG3MXXB12_SLAVE_PORT_ENABLE, 0x0 },
    { RG3MXXB12_SSPORTS_PULLUP_SETTING, rg3mxxb12_pullup_500_ohm },
    { RG3MXXB12_SSPORTS_PULLUP_ENABLE, 0xFF },
    { RG3MXXB12_SSPORTS_OD_ONLY, 0x0 },
    { RG3MXXB12_SLAVE_PORT_ENABLE, 0xFF },
    { RG3MXXB12_SSPORTS_HUB_NETWORK_CONNECTION, 0xFF },
}