Here is a list of all class members with links to the classes they belong to:
- s -
- SADC : _isl28022_init_arg
- sample_count : _sensor_cfg_
- scalefactor : _adc128d818_init_arg, _max11617_init_arg
- sdr_ver : _SDR_Full_sensor_
- sdrRepoEmpty : SELF_TEST_RESULT_STRUCT::RESULT
- secondary_major_version : _freya_fw_info
- secondary_minor_version : _freya_fw_info
- sect_cnt : xdpe15284_config
- sect_count : tda38640_config
- section : tda38640_config, xdpe15284_config
- self_act_func : pldm_fw_update_info
- self_address : IPMB_config
- self_apply_work_arg : pldm_fw_update_info
- self_apply_work_func : pldm_fw_update_info
- self_contained : downstream_device_parameter_table
- selfContainedActivationRequest : pldm_activate_firmware_req
- sen_num : _err_sensor_mapping, fb_sen_entry
- senser_num : _pump_reset_struct, _sensor_access_mapping
- sensor_capabilities : _SDR_Full_sensor_
- sensor_data_size : pldm_get_sensor_reading_resp, pldm_sensor_event_numeric_exp_data, pldm_sensor_event_numeric_sensor_state
- sensor_event_class : _pldm_sensor_event_sup_lst
- sensor_event_class_type : pldm_sensor_event_data
- sensor_event_message_enable : pldm_get_sensor_reading_resp
- sensor_id : _cx7_init_arg, _nv_satmc_init_arg, _pldm_sensor_event_sup_lst, plat_sensor_tmp_extend_info, plat_sensor_vr_extend_info, pldm_get_sensor_reading_req, pldm_get_state_sensor_reading_req, pldm_sensor_event_data, temp_mapping_sensor, temp_threshold_mapping_sensor, vr_mapping_sensor
- sensor_init : _SDR_Full_sensor_
- sensor_max_read : _SDR_Full_sensor_
- sensor_min_read : _SDR_Full_sensor_
- sensor_name : aegis_compnt_mapping_sensor, temp_mapping_sensor, vr_mapping_sensor
- sensor_num : _ACCURACY_SENSOR_READING_REQ, _alert_sensor_info, _SDR_Full_sensor_, _sensor_poll_time_cfg, fsc_type_mapping, pid_cfg, sel_event_record, sensor_threshold, stepwise_cfg, yv3_change_sdr
- sensor_num_1 : _vr_ubc_device_table_
- sensor_num_2 : _vr_ubc_device_table_
- sensor_number : common_addsel_msg_t
- sensor_offset : pldm_sensor_event_state_sensor_state
- sensor_ofst : pldm_sensor_event_state_exp_data
- sensor_op_state : state_field_state_sensor_reading_get
- sensor_operational_state : pldm_get_sensor_reading_resp
- sensor_rearm : pldm_get_state_sensor_reading_req
- sensor_type : _SDR_Full_sensor_, common_addsel_msg_t, sel_event_record
- sensor_unit1 : _SDR_Full_sensor_
- sensor_unit2 : _SDR_Full_sensor_
- sensor_unit3 : _SDR_Full_sensor_
- seq : ipmi_msg
- seq_source : ipmi_msg
- seq_target : ipmi_msg
- set_duty : zone_cfg
- set_duty_arg : zone_cfg
- set_eid_work : _cxl_work_info
- set_endpoint : _mctp_route_entry
- set_memory_channel : _get_cpu_memory_temp_req
- set_read_cpu0 : _get_cpu_memory_temp_req
- set_read_cpu1 : _get_cpu_memory_temp_req
- set_read_cpu2 : _get_cpu_memory_temp_req
- set_read_cpu3 : _get_cpu_memory_temp_req
- set_request : state_field_state_effecter_set
- set_request_format : _get_cpu_memory_temp_req
- set_use_cpu : _get_cpu_memory_temp_req
- setpoint : pid_cfg
- setup_byte : _max11617_init_arg
- shell : stress_e1s_pwr_s
- shift : ADC_INFO, adc_info
- shunt_volt_time : _ina233_init_arg_, _sq52205_init_arg_
- shunt_voltage_ov : _sq52205_init_arg_
- shunt_voltage_uv : _sq52205_init_arg_
- SIMULTANEOUS : _adm1272_init_arg, _adm1278_init_arg
- size : _pump_running_time_struct, pldm_oem_read_file_attr_info
- skip_msg_wr : i2c_target_data
- slew_neg : zone_cfg
- slew_pos : zone_cfg
- slot : _cci_activate_fw_req, _cci_transfer_fw_req
- slot1_fw_revision : _cci_fw_info_resp
- slot2_fw_revision : _cci_fw_info_resp
- slot3_fw_revision : _cci_fw_info_resp
- slot4_fw_revision : _cci_fw_info_resp
- slot_eid : _SLOT_EID_MAPPING_TABLE
- slot_pid : _SLOT_EID_MAPPING_TABLE
- smbus_addr : _pmic_init_arg
- smbus_address : _memory_write_read_req_
- smbus_bus_identifier : _pmic_init_arg
- smbus_conf : mctp_medium_conf
- smbus_ext_params : _mctp_ext_params
- smbus_identifier : _memory_write_read_req_
- SOL : _ina230_init_arg
- spd_temp_data : dimm_info
- src_addr : ipmi_msg
- src_LUN : ipmi_msg
- src_offset : _flash_copy_info_
- standard_rpm : pump_threshold_mapping
- standbyDisable : CHASSIS_STATUS_STRUCT::CHASSIS_BUTTON_ENABLES
- standbyDisableAllowed : CHASSIS_STATUS_STRUCT::CHASSIS_BUTTON_ENABLES
- start_addr : _modbus_command_mapping
- start_ID : _SDR_INFO_
- start_offset : _EEPROM_CFG_
- start_sensor_num : _accl_card_sensor_info
- state_sensor_idx : _nv_satmc_init_arg
- status : _ACCURACY_SENSOR_READING_RES, _cpuid_RdData_, _flash_copy_info_, _GPIO_CFG_, _mca_RdData_, _set_eid_resp, _wait_fw_update_status_info, SELF_TEST_RESULT_STRUCT
- status_changed_cb : _aegis_cpld_info_
- step : stepwise_cfg
- stop_fn : clock_t
- stop_work : stress_e1s_pwr_s
- strap_name : bootstrap_mapping_register
- structure_instance_id : __attribute__
- SUL : _ina230_init_arg
- support_update_simultaneously : capabilities, pldm_query_downstream_devices_resp::capabilities
- supports_activate_pending_image : downstream_device_parameter_table
- sw_tbl : zone_cfg
- sw_tbl_num : zone_cfg
- sw_to_flash_value : SWITCH_MUX_INFO
- switch_adc_mode : _sq52205_init_arg_
- switch_ein_mode : _sq52205_init_arg_
- sys_rst : _cxl_power_control_gpio
- sys_time : _modbus_err_log_mapping
- system_bios_major_release : __attribute__
- system_bios_minor_release : __attribute__
- system_reboot : downstream_device_parameter_table
1.9.2