plat_pldm_monitor.c File Reference

#include <logging/log.h>
#include <stdlib.h>
#include <device.h>
#include "sensor.h"
#include "hal_gpio.h"
#include "pldm.h"
#include "plat_gpio.h"
#include "plat_i2c.h"
#include "plat_sensor_table.h"
#include "plat_pldm_monitor.h"

Include dependency graph for plat_pldm_monitor.c:

Functions
	LOG_MODULE_REGISTER (plat_pldm_monitor)
void	plat_pldm_load_state_effecter_table (void)
void	plat_pldm_dev_driver_handler (const uint8_t *buf, uint16_t len, uint8_t *resp, uint16_t *resp_len, uint16_t effecter_id)
void	plat_pldm_switch_uart (const uint8_t *buf, uint16_t len, uint8_t *resp, uint16_t *resp_len)
uint8_t	plat_pldm_set_state_effecter_state_handler (const uint8_t *buf, uint16_t len, uint8_t *resp, uint16_t *resp_len, struct pldm_state_effecter_info *info_p)
uint8_t	plat_pldm_get_state_effecter_state_handler (const uint8_t *buf, uint16_t len, uint8_t *resp, uint16_t *resp_len, struct pldm_state_effecter_info *info_p)

Variables
struct pldm_state_effecter_info	plat_state_effecter_table []

Function Documentation

LOG_MODULE_REGISTER()

LOG_MODULE_REGISTER

(

plat_pldm_monitor

)

plat_pldm_dev_driver_handler()

void plat_pldm_dev_driver_handler	(	const uint8_t *	buf,
		uint16_t	len,
		uint8_t *	resp,
		uint16_t *	resp_len,
		uint16_t	effecter_id
	)

Here is the call graph for this function:

plat_pldm_get_state_effecter_state_handler()

uint8_t plat_pldm_get_state_effecter_state_handler	(	const uint8_t *	buf,
		uint16_t	len,
		uint8_t *	resp,
		uint16_t *	resp_len,
		struct pldm_state_effecter_info *	info_p
	)

Here is the call graph for this function:

plat_pldm_load_state_effecter_table()

void plat_pldm_load_state_effecter_table

(

void

)

plat_pldm_set_state_effecter_state_handler()

uint8_t plat_pldm_set_state_effecter_state_handler	(	const uint8_t *	buf,
		uint16_t	len,
		uint8_t *	resp,
		uint16_t *	resp_len,
		struct pldm_state_effecter_info *	info_p
	)

Here is the call graph for this function:

plat_pldm_switch_uart()

void plat_pldm_switch_uart	(	const uint8_t *	buf,
		uint16_t	len,
		uint8_t *	resp,
		uint16_t *	resp_len
	)

Here is the call graph for this function:

Variable Documentation

plat_state_effecter_table

struct pldm_state_effecter_info plat_state_effecter_table[]

Initial value:

= {
    [0 ... PLDM_PLATFORM_OEM_AST1030_GPIO_PIN_NUM_MAX] = {
        .entity_type = PLDM_ENTITY_IO_CONTROLLER,
    },
 
    [PLDM_PLATFORM_OEM_AST1030_GPIO_PIN_NUM_MAX + 1] = {
        .entity_type = PLDM_ENTITY_OTHER_BUS,
        .effecter_id = PLAT_PLDM_EFFECTER_ID_UART_SWITCH,
    },
 
    [PLDM_PLATFORM_OEM_AST1030_GPIO_PIN_NUM_MAX + 2] = {
        .entity_type = PLDM_ENTITY_DEVICE_DRIVER,
        .effecter_id = PLAT_PLDM_EFFECTER_ID_SPI_REINIT,
    },
}